Detailed explanation of the operation procedures of the XRF Fusion machine, allowing you to easily master the operation skills

Detailed explanation of the operation procedures of the XRF Fusion machine, allowing you to easily master the operation skills

I. Equipment preparation
1. Check whether the melting machine is in normal working condition. If there is any fault, it should be handled in time.

2. Check whether the heating element and thermometer of the melting machine are normal.

3. Prepare the required samples, flux and melt mold.

II. Sample preparation
1. Mix the sample powder evenly according to the proportion.

2. Put the mixed sample into the melt mold and add an appropriate amount of flux to the melt mold.

3. Put the melt mold into the melting machine.

III. Heating
1. Turn on the heating switch of the melting machine and gradually increase the temperature until the required temperature is reached.

2. Maintain the temperature for a period of time to fully melt the sample.

IV. Cooling
1. Turn off the heating switch of the melting machine, wait until the temperature drops to room temperature, and then take out the melt mold.

2. Put the melt mold into the cooler and let it cool slowly.

3. After cooling, take out the sample and analyze it.`